Test Automation

Our products are optimized for remote-control of embedded devices and allow test-automation with labgird.

USB-SD-Mux FAST

Successor of the USB-SD-Mux Classic. Remotely switch a Micro-SD-card between an embedded device and a test-server to update the card's contents.

Features:

  • Switch Mico-SD-cards
  • USB 2.0
  • Supported by labgrid
  • Python3
  • Capable of handling fast Micro-SD-cards up to UHS-I / SD104

USB-SD-Mux Classic

Remotely switch a Micro-SD-card between an embedded device and a test-server to update the card's contents.

Features:

  • Switch Mico-SD-cards
  • USB 2.0
  • Supported by labgrid
  • Python3

LXA Test Automation Controller

A device for interactive development and automated testing of embedded devices.

Typical applications:

  • Embedded Linux Development
  • Continuous Testing of Software on real Hardware
  • Exporter for labgrid

Ethernet-Mux

Multiplexes Ethernet ports. This way an embedded device can be switched between two network devices. It can also be used to simulate plugging and unplugging of network cables.

Features:

  • RJ45
  • Controlled via LXA-IOBus
  • Supported by labgrid
  • Python3

USB-Mux

Connects and disconnects USB ports. It can be used to simulate plugging and unplugging of USB devices or to remotely change the contents of a USB flash drive.

Features:

  • USB 2.0
  • Supported by labgrid
  • Python3

Optick

Measurement system for latencies between a DUT's camera and display. Enables automated or interactive measurements of glass-to-glass latencies.

Features:

  • Connected via LXA IOBus
  • Command line tool
  • Two independent channels
  • Measurement resolution: 21ns

Industrial Communication

Our products expand the interfaces of host PCs or DUTs and support development on Ethernet and CAN.

candleLight FD

A small Open Hardware USB to CAN interface. Adds a CAN interface to any PC via USB and allows communication via CAN or CAN-FD.

Features:

  • CAN-FD on D-Sub 9
  • USB-C with USB 2.0
  • Natively supported by SocketCAN
  • Unlocked Bootloader

USB-T1L

USB 10Base-T1L Interface for development.

Features:

  • TI DP83TD510E Phy
  • Complete phy register access
  • Firmware-free design
  • Mainline Linux (from Linux 6.1)

LXA Tools

LXA Tools are little helpers that make debugging embedded devices easier.

LXA Tools

Little helpers to ease embedded hardware development.

Products:

  • USB 2.0 Crossover breakout
  • RJ45-Matrix

LXA IOBus

A CANOpen inspired interface for reliable communication between test server and automation equipment using CAN 2.0 instead of USB.

Products:

  • LXA IOBus Server
  • LXA IOBus 4DO-3DI-3AI

Didn't find what you were looking for?

We also develop new test hardware and electronics for you!